ACR-News
19 August 2019

Turnkey compressed air project design and delivery

Atlas Copco’s experts can design, specify and coordinate your compressed air project while you focus on what you do best instead.

Atlas Copco will design, specify and coordinate your compressed air project.

Specifying a compressed air installation can bring about many questions, especially if you are an M&E contractor or consultant who works on various projects, of which compressed air is just one part. What size compressor? What type of dryer? Wet receiver or dry receiver? What level of filtration is necessary for clean, dry air? What's the best pipework? What is the best location for a compressed air installation? Will it be too noisy? Who can safely install it?

More importantly, not asking the right questions can lead to complicated, inefficient or wasteful systems that will disappoint your end customer. Becoming an expert in compressed air installations is neither easy nor quick, and it can be difficult to stay on top of the latest technology and legislation, especially when you also have to give your attention to being up to date with the latest innovations in lighting, heating, etc., as well.

Then there are vacuum pump installations, onsite industrial gas generators, pipework, receivers and ancillary equipment. Getting to grips with it all can quickly eat into your time.

Atlas Copco can provide a complete package - from design to installation and commissioning. You do not have to become an expert in compressed air, industrial gases or vacuum pump installations if your project requires any of these. Atlas Copco will take care of all design, specification, installation and commissioning concerns.

Atlas Copco is here if you conclude that it's easier to hand over the whole compressor system design, specification, installation and commissioning to an expert who can deliver quality work each time. Instead, leaving you to focus on those areas of the project in which you are a specialist, and simply integrate the complete package into the rest of your work.

If your project is overseas, rest assured that the equipment chosen is easy to maintain, with genuine spare parts available throughout the globe and expert, factory-trained Atlas Copco technicians within easy reach for service support and manufacturer approved maintenance, wherever you are in the world.

Comments

Already Registered?
Sign In
Not Yet Registered?
Register

World Refrigeration Day

Industry has embraced the inaugural World Refrigeration Day (WRD) with events happening all over the world....

  25-Jun-2019

Humidity Solutions recognised in Parliamentary Review

Humidity Solutions has been featured in the September release of the Parliamentary Review which highlights the best practice of organisations across both private and public sectors....

  17-Sep-2019

New NOVUS I/O Module Leads Industry 4.0 to DIN Rail

DigiRail Connect can be used as a slave device in Modbus RTU networks that have RS485 interface or as a server device in Modbus TCP networks that have Ethernet.
  09-Sep-2019
ACR News is the number one magazine in the air conditioning and refrigeration industry. Don’t miss out, subscribe today!
Subcribe to ACR News

Diary

Hampshire Cool Talk Breakfast Briefing
Queen Mary University "Enhanced condensation heat transfer" Huasheng Wang
HVR Awards
IoR Northern branch annual dinner
IoR Scotland annual dinner